Vacuum Solenoid Valve, Proportional Solenoid Valve:

Vacuum Solenoid Valve are manufactured under strict quality control. Every Valve is 100% tested both pneumatically as well aselectrically before leaving the plant. We supplies high quality Vacuum Solenoid Valve and Proportional Solenoid Valve. The proportional solenoid control valve consists of the basic valve and an electronic control unit. The valve can also be fitted with a PI controller for Flow, Pressure, and Temperature control.
Patcon Pneumatics - Offers variety of Vacuum Solenoid Valve and Proportional Solenoid Valve. Find manufacturer of quality Proportional Solenoid Valve and Vacuum Solenoid Valve from www.patconpneumatics.com.
 
Special Products
 
     
 
 
Electro Magnetic Puller / Pusher

Stroke:1 to 25mm
Load: upto 5 kg
Voltage : any std. D/C Voltage
 
 
PC22CD8V

Special valve developed for Vaccum Application where flow rates are moderate. The Valve has the capacity of 8.00mm bore full port & comes in Brass MOC with right angle construction. The special floating seat design makes it leak proof & the compact construction makes it economical & commercially viable. Available in any std A/C voltage.
  
 
 
 
PC22CDF

2 Way Normally Closed Valve specially developed for Furnace Oil Application. The Valve can work up to 150 Deg.C temp, and up to 30 Bar pressure.
 
 
PC22CDL

2 Way Normally Closed Valve specially developed for LDO application, can work up to 20 Bar pressure
  
 
 
 
PC22CDII

2 Way Direct Acting High pressure Valve for Pneumatic Application specially developed for fire fighting application suitable for pressure as high as 200 Bar. M.O.C.-Brass, Available Connection 1/8" & 1/4" BSP Only.
 
 
CPC42P3

Only of its kind in the low flow region 4/2 way Poppet design available in 1/8" BSP & 1/4" BSP Only & is ideal for small miniature double acting pneumatic cylinders.
  
 
 
 
PC22CEP12

Special Valve developed for Vaccum Application allows tight shut off. External air pilot operated valve air pressure required is 2 Bar only. Available in Aluminium /Brass & in 1/2" BSP, as well as in any A/C, D/C voltage.
 
 
PC32CEP12HL

 Combination of low pressure and high pressure Valve has two inlets, One for low pressure (@7Bar) & one for high pressure (@30 to 40 Bar). Valve allows the low pressure first from outlet & then high pressure. Used for pet bottle blow moulding machines. The design of valve does not demand a high voltage solenoid. Available in any std. A/C, D/C voltage.
 
 
 
 
PC22DC12

Diaphragm type Valve with unique design. Valve opens to it's full opening even at no pressure, very ideal for low pressure & high flow requirements. Available in Aluminium /Brass from 1/2" to 1" Port sizes, available in any std. A/C, D/C voltage.
 
 
Pinch Valve Special Valve developed for filling machines where small quantities are required to be filled with high repeat accuracy. The fluid passes through the silicon tube & hence never comes in contact with the valve parts. Valve allows the same flow repeatedly provided the fluid pressure & Valve "ON" time are constant. Valve can go up to 80 to 100 operations per minute, available in any std. A/C, D/C voltage.
 
 
 
 
PC22CD10

Specially developed for the bottle filling application where the pressure is low (generally gravity heads) available in S.S. The construction of Valve in such that the inlet is horizontal & the Outlet is Vertical. This reduces the pressure drop inside the Valve & offers the advantage of mounting the valve exactly on the bottle. Flow capacity up to 50ML/ Second available in 1/2" BSP(F)-SS, available in any std. A/C, D/C voltage.
 
 
PC22CD10G

Direct Acting designed specially for the use with LPG/application available in 1/2" BSP (F) inline construction & in Brass / Aluminium MOC can work up to 0.2 bar Gas pressure.Available in any std. A/C, D/C voltage.
 
 
     
 
Back
 Top